Oe Stanadyne Return Fitting Tee Nut On John Deere Pencil
Fuel Injector 17722
USD $29.44
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
OE Fuel return tee kit to fit on the top of Stanadyne diesel pencil injectors. This item is OEM Stanadyne brand which is the OE manufacturer for John Deere 17722 Kit includes: 1x aluminum tee 17719 1x steel nut 17720 1x grommet 17721 Fitment: *If it looks like the one you are replacing, it probably is the right part for you! These injector return tees are on so many JD models. See list below. Installation tips:
1. First unscrew the tee and set aside.
2. “Gently” clamp nut in to a vise and force injector through old grommet by pulling, twisting and WD40, do not loosen any of the nuts on top of the injector itself, this could change settings. I guess one could pick out the old grommet with a probe but would be tedious. (Use care not to warp nut with the vice)
3. Slide on nut without the grommet and then poke in new grommet.
4. Slide nut and grommet up and thread onto the tee, the assembly does not have to be very tight to seal. ***Do NOT trust this list completely: please verify that it looks like the part you are replacing! ***This list is also certainly incomplete. If you don't see your model below, that doesn't necessarily mean this doesn't fit your equipment. John Deere Models: Backhoe, Loader 300b 302A 310 310A 401c 410 Bulldozer 350B 450 450B 450c 550 750 Combine 3300 4400 4420 6600 920 925 930 932 952 955 965 985 Forklift 380 480 480a Grader, Motor 570 670 670A Harvester, Forage 5420 HI-Cycle 6000 Loader, Crawler 350 350c 450c 555 755 Loader, Four-Wheel Drive 444 544 544B Loader, Skid-Steer 24 Loader, Two-Wheel Drive 301 301a 302 400 401B Picker, Cotton 9900 9910 Power Unit 135 180 219 303 329 Skidder, Log 440 440c 540 540B 640 Stripper, Cotton 484 Tractor 1020 1030 130OU 1030VU 1035 1035EF 1035EV 1520 1530 1830 2020 2030 2035 2040 2240 2440 2510 2520 2630 2640 2840 3030 3120 4030 4040 820(3 Cyl.) 830(3 Cyl.) As always, if you need any help, don't hesitate to shoot us a message. We are here to help!
1. First unscrew the tee and set aside.
2. “Gently” clamp nut in to a vise and force injector through old grommet by pulling, twisting and WD40, do not loosen any of the nuts on top of the injector itself, this could change settings. I guess one could pick out the old grommet with a probe but would be tedious. (Use care not to warp nut with the vice)
3. Slide on nut without the grommet and then poke in new grommet.
4. Slide nut and grommet up and thread onto the tee, the assembly does not have to be very tight to seal. ***Do NOT trust this list completely: please verify that it looks like the part you are replacing! ***This list is also certainly incomplete. If you don't see your model below, that doesn't necessarily mean this doesn't fit your equipment. John Deere Models: Backhoe, Loader 300b 302A 310 310A 401c 410 Bulldozer 350B 450 450B 450c 550 750 Combine 3300 4400 4420 6600 920 925 930 932 952 955 965 985 Forklift 380 480 480a Grader, Motor 570 670 670A Harvester, Forage 5420 HI-Cycle 6000 Loader, Crawler 350 350c 450c 555 755 Loader, Four-Wheel Drive 444 544 544B Loader, Skid-Steer 24 Loader, Two-Wheel Drive 301 301a 302 400 401B Picker, Cotton 9900 9910 Power Unit 135 180 219 303 329 Skidder, Log 440 440c 540 540B 640 Stripper, Cotton 484 Tractor 1020 1030 130OU 1030VU 1035 1035EF 1035EV 1520 1530 1830 2020 2030 2035 2040 2240 2440 2510 2520 2630 2640 2840 3030 3120 4030 4040 820(3 Cyl.) 830(3 Cyl.) As always, if you need any help, don't hesitate to shoot us a message. We are here to help!
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
